Protective UV glass for Xiaomi Mi Note 10 - Transparent

The hardened fenix UV glass protects a significant part of the curved screen, has a surface hardness of 9H, making it extremely scratch-resistant even when in contact with sharp objects, plus it is coated with an oleophobic coating, which reduces fingerprints.

The UV model is glued using a liquid substance all over the surface of the screen and then the substance is cured using a UV lamp. With this combination we get the ideal effect of smoothness, clarity and response

Instalation is very easy

Installation instructions:

• 1) Install the glass in the bathroom just after the bath - the steam will absorb all the dust from the atmosphere and will not interfere with the installation.
• 2) Thoroughly clean and degrease the screen surface, then polish with a dry cloth.
• 3) Use the tape from the kit to seal the speaker.
• 4) Connect the UV lamp to the power supply using a type C cable.
• 5) Pour the liquid into the very centre of the device.
• 6) Install the glass as accurately as possible, this step can also be corrected before the surface hardens when the liquid is on the screen with the glass.
• 7) If air bubbles appear, use the credit card and gently push it outside the glass, we will perform this action before curing.
• 8) With the UV lamp, cure the glass along the centre in five places for 15 seconds and then at the edge for about 10 seconds.
• 9) Clean the phone of any hardened adhesive residue.
• 10) If your device has an on-screen fingerprint reader, remove it and reattach the fingerprint after installing the glass on the screen.

Features:

• Packed in original packaging
• Tempered glass with 0.3 mm thickness
• 9H scratch resistance
• Fitted with oleophobic coating
• Leaves no trace when removed

The set includes:

• 1 x Fenix UV glass
• 1 x UV lamp (without type C cable)
• 1 x Tube with glue
• 1 x Instalation Kit